1 4

EAS MAX Fastners Kit

EAS MAX Fastners Kit

€25,00 EUR
€25,00 EUR €25,00 EUR
Sale Sold out
Shipping calculated at checkout.

Everything you need to assemble the EAS MAX frame — all screws, heat set inserts, springs, brass rod, and cable management included. Pre-counted and sorted for exactly one build. No hunting down individual fastener packs, no guessing quantities.

 

Print your parts, grab this kit, and build.

SCREWS +
COUNTERSUNK (CS)
M3 × 6mm × 14
ROUND HEAD (RH)
M3 × 8mm × 8
M3 × 10mm × 8
M2 × 6mm × 4
M2 × 8mm × 2
HEAT SET INSERTS +

Standard brass heat set inserts. Install with a soldering iron at low heat — press flush into the printed part.

M3 × 6mm standard M3
× 16
M3 × 3mm short M3
× 5
M2 × 3mm M2
× 6
SPRINGS +
Nozzle Compression Spring
Length: 20mm  ·  OD: 10mm  ·  Wire: 0.6mm
× 1
Latch Compression Spring
Length: 15mm  ·  OD: 4.5mm  ·  Wire: 0.5mm
× 1
BRASS ROD +
Brass Rod — pre-cut to 32mm
Outside diameter: 8mm  ·  Inside diameter: 7mm  ·  Length: 32mm
Pre-cut to the correct length — ready to install.
× 1
CABLE MANAGEMENT +
Cable ties — small assorted
NOT INCLUDED +
  • 3D printed parts — sold separately as the EAS MAX STL file pack
  • PCB and electronics — sold separately
  • Battery and power wire
  • Soldering iron for heat set inserts
COMPATIBILITY

Designed and counted specifically for the EAS MAX. Not compatible with EAS 1.0 or EAS ADV without modification. Full build parts list available at buymeacoffee.com/quizcen.

This kit is sold for personal DIY use as part of the EAS MAX build. Not for resale or commercial use.
*Trey in picture is not included.
View full details